THE PROCESS:
Stage 1
The bath is thoroughly cleaned, using special degreasing and decalcifying chemicals.
The bath is thoroughly cleaned, using special degreasing and decalcifying chemicals.
Stage 2
The surface is treated with an industrial grinding process to provide a good bonding key.
The surface is treated with an industrial grinding process to provide a good bonding key.
Stage 3
The bath is neutralised with specialist cleaning agents.
The bath is neutralised with specialist cleaning agents.
Stage 4
Any damaged areas are repaired and finished.
Any damaged areas are repaired and finished.
Stage 5
The surrounding area and bath fittings are masked.
The surrounding area and bath fittings are masked.
Stage 6
The bath is coated with three pressure sprayed undercoats.
The bath is coated with three pressure sprayed undercoats.
Stage 7
The bath receives three pressure-sprayed coats of VITROCOAT®
The bath receives three pressure-sprayed coats of VITROCOAT®
Stage 8
An infra red heat treatment is applied, to cure the bath.
Stage 9
The bath is polished and buffed to a high shine.